|
Select Print 1 Page Only to Print This Page Only |
|
e-tes 120 16.67 amps 2 circuits gives you 4,000 watts (25amp) 14.6amps 2 circuits gives you 3504 watts (20amp) 4,000 watts, Requires a 25 amp breaker to be NEC® compliant breaker. 14.6amps, Requires a 20 amp breaker to be NEC® compliant
e-tes 240 25.9 amps 1 circuits gives you 6,216 watts, Requires a 35 amp breaker to be NEC® compliant breaker.
Watts and Amps Shown Above Are From TES’s Web Site |
|
|
ELE 6400 |
Energedry Eliminator |
e-tes 240 |
e-tes 120 |
|
NEC ® Compliant (National Electrical Code) |
Yes (15amp breaker ) |
Yes (15amp breaker) |
Yes (35amp breaker) |
Yes (20 or 25amp breaker) |
|
Self-Contained fan |
Yes – Unit comes complete with built in fan or use regular airmover for hi cfm application |
Yes – Unit comes complete with built in fan or use regular airmover for hi cfm application |
No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra |
No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra |
|
Directed heat drying at materials with temperature control at materials |
Yes – You set the desired temperature in the tenting or containment for maximum control |
Yes – You set the desired temperature in the tenting or containment for maximum control |
No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment |
No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment |
|
Stackable as used |
Yes |
Yes |
No |
No |
|
Temperature difference of air entering unit versus air temp coming out of unit |
100F temperature rise |
100F temperature rise |
Up to 32F rise |
Up to 21F rise |
|
Easy to dry wood floors, cabinets, etc… with containment |
Yes – Airflow is 275 cfm making it easy to contain & control heat within plastic tenting, etc… |
Yes – Airflow is 325 cfm making it easy to contain & control heat within plastic tenting, etc… |
No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air. |
No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air. |
|
Fast heat up capability |
Yes – Full heat within seconds of turning on |
Yes – Full heat within seconds of turning on |
Slower heat up and far less temperature increase |
Slowest heat up and far less temperature increase |
|
System allows you to use only the power necessary instead of having to use full power all the time. |
Yes – Advantage is you have more electricity for other equipment & use less electricity |
Yes – Advantage is you have more electricity for other equipment & use less electricity |
No |
? |
|
Fast cool down capability |
Yes – Advanced filaments’ allow you to shut the system off at any time with complete safety |
Yes – Advanced filaments’ allow you to shut the system off at any time with complete safety |
No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual. |
No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual. |
|
Use with 120v and 240v current |
Yes |
Yes |
No – 240 volt only |
Yes |
|
Can be used with normal airmover & industry attachments |
Yes |
Yes |
Yes |
Yes |
|
Can hot moist air be vented while keeping building exterior security System on |
Yes – Because system has a control thermostat you can use VapairVent avoiding ducting out window & losing building security |
Yes – Because system has a control thermostat you can use VapairVent avoiding ducting out window & losing building security |
No |
No |
|
Retail Price Complete |
$1,999.00 Yes - Complete |
$1,999.99 Yes - Complete |
$2,395.00 Not complete system |
$2,195.00 Not complete system |