Text Box: Our Revolutionary Thermal Evaporative Accelerator Energedry ELE 6400 Series . This Heater Has Revolutionized the Restoration Industry Field Tested for Quality, Durability and Performance. Easily Dries Up to 400 sq ft Carpet, Padding and more. Perfect for Drying Wood Floors, Personal Property, Structural Drying and much more. With the ELE 6400 there is No need for external air movement, because this system has a self contained fan. Retail Price $1,999.00 Sale Priced at $1,899.00 with FREE SHIPPING to the Lower 48 States VapairVent Ventilation System Is Now Available and Works Great with the Eliminator/ELE 6400 ELE 6400 & VapairVent Ventilation/Dehumidification Package

Check Out Your Part of the Country for Approximate Energy Cost

Click on Logo Below

Line Callout 4 (Border and Accent Bar): Circuit 1, This plug runs the Fan and 1st Set of Heating Elements. This circuit must be plugged in for unit to turn on. 120VAC

Line Callout 4 (Border and Accent Bar): Circuit 2, This plug runs 2nd Set of Heating Elements. 120VAC

Line Callout 4 (Border and Accent Bar): Circuit 3, This plug runs 3rd Set of Heating Elements. 120VAC

Line Callout 4 (Border and Accent Bar): Circuit 4, This plug runs 4th Set of Heating Elements. 120VAC

With the ELE 6400 you will get the job done fast. With this system drying dehumidification is not needed in most cases, but can be added in some drying situations for even faster drying.

It's a fact of drying that warmer air can hold more water vapor. At 70°F, air can hold twice the moisture of air at 50°F. This particular difference of twenty degrees means that you can evaporate twice the moisture from structural materials. Use the ELE 6400 to create "thirsty" air with greater moisture-carrying capacity. The ELE 6400 is the most powerful Industry specific electric heat drying system that is totally self-contained and thermostatically controlled. Custom ramp up power feature allows for less energy consumption without compromising performance. Drying walls, carpet, wood floors, cabinets, etc... with ease. See Typical Drying for the ELE 6400

Operations Manual

Warranty Information

Energedry ELE 6400 Series

Teal Standard Color

Great Color for Service Master

Custom Colors Available Minimums Do Apply

with Special Orders

Perfect for Drying Wood Floors

Comparison of the ELE 6400to e-Tes

WTRHTAM>

<a href="https://secure.blueoctane.net//forms/84XEO69YXI3J">Click Here To Load This Formexperts.com Form</a>

ELE 6400 Detail Pictures

Blue Standard Color

Custom Colors Available Minimums Do Apply

with Special Orders

Stackable

Energedry ELE 6400 Series - Thermal Evaporative Accelerator
• Outperforms dehumidifiers 100% of the time • Works on 115v circuit or 230v splitter with “Ramp Up” power feature that keeps more circuits available for airmovers • 100F temperature rise capability allows for proper temperature control in positive, neutral or negative pressures • Digital thermostat w/12’ cable measures temperatures from within the drying or tented area for accurate control of drying temperature • Heavy duty construction, durability & built in pocket to protect thermostat

The ELE 6400 is NEC ® compliant (National Electrical Code)

FREE SHIPPING to the Lower 48 States (Some restrictions may apply) See Terms of Use for More Details

Circuit 1 is for the fan. Circuits 2, 3, 4 and 5 are plugged in as needed for more heat. In Most Cases Only Circuits 2 and 3 Circuits Are Needed. This Will Give You Approximately a 25 Degree Temperature Rise Per Heating Circuit Used.

Warranty: 5 years on the housing. 1 year on parts and labor

Our Drying Systems create the Fastest Drying possible. Unlike our competitors, our systems control the temperature at the materials. We use a thermostat control that you place in the drying area to regulate the temperature at the materials. This is unique because most units cannot control the temperature at the materials. They control the exhaust temperature only. Not smart.

Our ELE 6400 electric heat drying system is the most versatile electric unit on the market today. Floating, tenting, hi-pressure, low-pressure, wood floors, wall drying system, etc.. the ELE 6400 does it all. And the ELE 6400 is NEC® Compliant (National Electric Code).

1-877-432-8601

Text Box: You Can Buy All Energedry Products from the Following Distributers

One 25’ Section of Mylar Ducting

One ELE 6400 with High Limit Digital Thermostat with 12’ Cord

ELE 6400

ELE 6400 (R)

DRI HEAT Drying Systems, ELE 6400

The Energedry ELE 6400 Revolutionized the Restoration Industry

Now the Energedry Eliminator Is the Next Generation Heater

The ELE Just Got Better. Introducing the Energedry Eliminator

Introductory Prices Starting at $1,999,00

when Calling

(Some restriction may apply)

Energedry Eliminator Series- Thermal Evaporative Accelerator
• Outperform Dehumidifiers 100% of the time when used with the VapairVent Ventilation System • Works on 115v circuit or 230v splitter with “Ramp Up” power feature that keeps more circuits available for airmovers • up to 96F temperature rise capability allow for proper temperature control in positive, neutral or negative pressures • Digital thermostat w/12’ cable measures temperatures from within the drying or tented area for accurate control of drying temperature • Heavy duty construction, durability & thermostat with 12’ cord and modular plug.

The Eliminator is NEC ® compliant using standard 15amp household breaker

Beware of Distributors that Offer the ELE 6400

The ELE 6400 has Been Discontinued Since September 2009 and Has Not Been Available from Manufacture Since September 2009.

e-tes 120

16.67 amps 2 circuits gives you 4,000 watts (25amp)

14.6amps 2 circuits gives you 3504 watts (20amp)

4,000 watts, Requires a 25 amp breaker to be NEC® compliant breaker.

14.6amps, Requires a 20 amp breaker to be NEC® compliant

e-tes 240

25.9 amps 1 circuits gives you 6,216 watts, Requires a 35 amp breaker to be NEC® compliant breaker.

Watts and Amps Shown Above Are From TES’s Web Site

Text Box: The Eliminator is the Next Generation Heater. The Eliminator Comes with Modular Thermostat Plug, Higher CFM, Redesigned for Much Greater Durability, 96° Temperature Rise, NEC ® compliant using standard 15amp household breaker and Much Much More. To Learn More About the Eliminator Click Here

The ELE 6400 has Been Discontinued

To See the Next Generation Heater the Eliminator Click Here

Specifications Shown Right Are for

ELE 6400’s Manufactured After 6-6-09

This Has Been Left Here To Help the People That Own the ELE 6400. The ELE 6400 has Been Discontinued Since September 2009

To See the Next Generation Heater the Eliminator Click Here

What Comes with the ELE 6400 (R)
DRI HEAT Part Number DHIELE6400R
Quantity	Description
1	ELE 6400
1	High Limit Digital Thermostat with 12’ Cord
1	Thermostat Plug
1	Operations Manual
Price for DHELE6400R

	ELE 6400	e-tes 240	e-tes 120
NEC ® Compliant (National Electrical Code)	Yes	No	No
Self-Contained fan	Yes – Unit comes complete with built in fan or use regular airmover for hi cfm application	No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra	No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra
Directed heat drying at materials with temperature control at materials	Yes – You set the desired temperature in the tenting or containment for maximum control	No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment	No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment
Stackable as used	Yes	No	No
Temperature difference of air entering unit versus air temp coming out of unit	100F temperature rise	Up to 32F rise	Up to 21F rise
Easy to dry wood floors, cabinets, etc… with containment	Yes – Airflow is 275 cfm making it easy to contain & control heat within plastic tenting, etc…	No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air.	No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air.
Fast heat up capability	Yes – Full heat within seconds of turning on	Slower heat up and far less temperature increase	Slowest heat up and far less temperature increase
System allows you to use only the power necessary instead of having to use full power all the time.	Yes – Advantage is you have more electricity for other equipment & use less electricity	No	?
Fast cool down capability	Yes – Advanced filaments’ allow you to shut the system off at any time with complete safety	No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual.	No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual.
Use with 120v and 240v current	Yes	No – 240 volt only	Yes
Can be used with normal airmover & industry attachments	Yes	Yes	Yes
Can hot moist air be vented while keeping building exterior security System on	Yes – Because system has a control thermostat you can use VapairVent avoiding ducting out window & losing building security	No	No
Retail Price Complete	$1,999.00 Yes - Complete	$2,395.00 Not complete system	$2,195.00 Not complete system

What Comes with the ELE 6400 (RM)
DRI HEAT Part Number DHIELE6400RM
Quantity	Description
1	ELE 6400
1	6” Dia x 25’ Mylar Ducting
1	High Limit Digital Thermostat with 12’ Cord
1	Thermostat Plug
1	Operations Manual
Price for DHELE6400RM


Specifications	ELE 6400 (R)	ELE 6400 (RM)
NEC ® Compliant (National Electrical Code)	Yes, (15amp Breaker) 11.67amps/Circuit	Yes, (15amp Breaker) 11.67amps/Circuit
Air volume	275 CFM	275 CFM
Amp Draw	11.67 amps	11.67 amps
Ductable	Yes	Yes
Duct Diameter	6"	6"
Fan Speed	1 Speed	1 Speed
Weight	36 lbs	36 lbs
Dimensions	30.3" X 13.95" X 15.75"	30.3" X 13.95" X 15.75"
Temp Rise	Up To 100 F	Up To 100 F
Fuel	Electric	Electric
Color	Standard Blue or Teal	Standard Blue or Teal
Price	Eliminator	Eliminator
FREE SHIPPING to the Lower 48 States
See Below What Comes with Packages
ELE 6400 Comparison Chart
Drying Only Materials (Focus Drying) Compared To Drying Whole Areas

ELE 6400

Energedry ELE 6400 Thermal Evaporative Accelerator

☻Quick and Safe Heating of Your Restoration or Building Site.

☻The ELE 6400 Electric Heater has been used to Dry Wood Floors, Personal Property, Structures, Carpet and much more.

☻With the ELE 6400 there is No need for external air movement, because this system has a self contained fan.

☻DRI HEAT has Added this Revolutionary Heater to an Already Sizeable Collection of Heaters.

☻Stackable with “Ramp Up” power feature.

☻Another use that has been reported to us is, Heating Up Personal Property and then Deodorizing it.

☻The ELE 6400 is NEC ® compliant (National Electrical Code).

DRI HEAT Drying Systems	Narrated Step By Step Examples of How the ITA 75	Drying System in Action	Online DRI HEAT Brochure (Printable)
Restoration Packages & Price List	IMA 61 Drying System (120vac) with Recirculation	Heat Drying Structures	Learn More About Heat Drying and Drying Classes
Eliminator, Thermal Evaporative Accelerator	IMA 111 Drying Systems with Recirculation	Typical Drying Setup Using Heat (Printable)	Buy A Drying System
Eliminator Online Brochure	IMA 185 Drying Systems with Recirculation	Create a Drying Chamber	Some of the Company's that Use Our Drying System
Narrated Step By Step Examples of How the Eliminator/ELE 6400	IMAC 2000 Drying System	Parts & Accessories	Previous Customers Comments and Feedback
VapairVent Ventilation System	Heat Drying; an Old Concept	Heater Accessories	Become A Member of the Emergency Restoration Network
ITA 45 Drying Systems	As Seen in Cleanfax	BIO Heaters	Contact Us
ITA 75 Drying Systems	Photo Gallery	Specs & Pricing for Heaters Only	Terms of Use/Disclaimer

	ELE 6400	Energedry Eliminator	e-tes 240	e-tes 120
NEC ® Compliant (National Electrical Code)	Yes (15amp breaker )	Yes (15amp breaker)	Yes (35amp breaker)	Yes (20 or 25amp breaker)
Self-Contained fan	Yes – Unit comes complete with built in fan or use regular airmover for hi cfm application	Yes – Unit comes complete with built in fan or use regular airmover for hi cfm application	No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra	No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra
Directed heat drying at materials with temperature control at materials	Yes – You set the desired temperature in the tenting or containment for maximum control	Yes – You set the desired temperature in the tenting or containment for maximum control	No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment	No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment
Stackable as used	Yes	Yes	No	No
Temperature difference of air entering unit versus air temp coming out of unit	100F temperature rise	100F temperature rise	Up to 32F rise	Up to 21F rise
Easy to dry wood floors, cabinets, etc… with containment	Yes – Airflow is 275 cfm making it easy to contain & control heat within plastic tenting, etc…	Yes – Airflow is 325 cfm making it easy to contain & control heat within plastic tenting, etc…	No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air.	No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air.
Fast heat up capability	Yes – Full heat within seconds of turning on	Yes – Full heat within seconds of turning on	Slower heat up and far less temperature increase	Slowest heat up and far less temperature increase
System allows you to use only the power necessary instead of having to use full power all the time.	Yes – Advantage is you have more electricity for other equipment & use less electricity	Yes – Advantage is you have more electricity for other equipment & use less electricity	No	?
Fast cool down capability	Yes – Advanced filaments’ allow you to shut the system off at any time with complete safety	Yes – Advanced filaments’ allow you to shut the system off at any time with complete safety	No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual.	No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual.
Use with 120v and 240v current	Yes	Yes	No – 240 volt only	Yes
Can be used with normal airmover & industry attachments	Yes	Yes	Yes	Yes
Can hot moist air be vented while keeping building exterior security System on	Yes – Because system has a control thermostat you can use VapairVent avoiding ducting out window & losing building security	Yes – Because system has a control thermostat you can use VapairVent avoiding ducting out window & losing building security	No	No
Retail Price Complete	Yes - Complete (ELE 6400 Discontinued) New Eliminator	$1,999.00 Yes - Complete	$2,395.00 Not complete system	$2,195.00 Not complete system