|
IMA 111 & 185 |
|
Fuel |
|
|
|
|
|
Heater Only |
|
Dimensions, Weight and Shipping Dimensions |
|
See More Restoration Packages Below |
|
Heater Only |
|
Comparison Chart |
|
IMA 111 Restoration Packages |
|
IMA 185 Restoration Package |
|
CSA certified and 88% efficient |
|
Little Giant Pull Cart and Fuel Tank |
|
Fuel Tank and Fuel Cart Comes with the IMA 111 and IMA 185 |
|
1-877-432-8601 |
|
Please Note: You will Receive much more than Just a Heater. The Restoration Packages Include the Extra Components Needed for Proper Drying System. All Restoration Packages Come Thermostatically Controlled. |
|
Please Note: You will Receive much more than Just a Heater when you Purchase a Restoration Package. The Restoration Packages Include the Extra Components Needed for a Proper Drying System. All Restoration Packages Come Thermostatically Controlled. |
|
88% Efficient |
|
* Does Not Come with Power Plug. Requires Your Plug and Installation. |
|
Please Note:The Fuel Tank for the IMA 111 & 185 Have Been Replaced. We Now Offer a Fuel Cell. |
|
Please Note: 1 Gallon of Propane Produces 91,500btus
1Gallon of Diesel Produces 139,200btus.
Thats About 35% More Energy Compared to Using Propane
This Is Very Important If You Are Comparing Propane to Diesel When Buying a Drying System |
IMA Oil fired with flue connection and separate external burnerAdvantages:· High capacity. · Easily transportable. Compact.Characteristics:· Durable phosphated body panels with powder coating. · With overheating protection and temperature limitation of warm air. · Preheating of chamber, so that no cold air is blown during start up. · Fully automatic, controllable with thermostat connection. · Tigerloop standard. · Fuel filter with condensate separator. · Burner with rain cover and lower tray for oil containment during servicing. · Room ventilation is required, fresh air connection available. · Radial HP · : 'High Pressure' for extra high pressure (2,0" WG) and air flow. · Radial fans are essential for heat distribution with hoses.
|
|
|
|
|
Diesel / Heating Oil. |
|
With the IMA 111 you will get the job done fast. It generates 370,000 BTUs of heat without adding any moisture or fumes to your drying environment. It has a recirculation system that will give you about 17 degrees additional increase in temperature rise compared to non recalculating systems. Drying with this system, dehumidification is not needed in most cases, but can be added in some drying situations for even faster drying. It's a fact of drying that warmer air can hold more water vapor. At 70°F, air can hold twice the moisture of air at 50°F. This particular difference of twenty degrees means that you can evaporate twice the moisture from structural materials. Use the IMA 111 to create "thirsty" air with greater moisture-carrying capacity. |
|
Specifications |
||
|
Capacity |
370,000 Btu/hr (Net) |
700,000 Btu/hr (Net) |
|
Air volume |
5,330 CFM |
7,660 CFM |
|
Hose Diameter |
20" |
24" |
|
Inlet Hose Diameter (Recirc) |
16" |
20" |
|
Length of Ductability |
100 |
150 |
|
Static Pressure |
1.6 WC Inches |
1.8 WC Inches |
|
Voltage |
240 V2 * |
240 V2 * |
|
Frequency |
60Hz |
60Hz |
|
Current |
15 Amps |
27 Amps |
|
Chimney Loss |
12% |
12% |
|
Fuel Consumption |
2.83 gal/hr |
4.85 gal/hr |
|
Fuel Type |
Diesel/Heating Oil |
Diesel/Heating Oil |
|
Chimney Connection |
8" |
8" |
|
Weight |
728 lbs |
944 lbs |
|
Dimensions |
87.8" x 30.7" x 52.8" |
106.7" x 35.8" x 59.8" |
|
Efficiency |
88% |
88% |
|
Pump Pressure |
145 PSI |
180 PSI |
|
Outlet Temp |
135 F |
154 F |
|
Delta T |
95 F |
104 F |
|
Price Heater Only |
* $11,800.00 |
* $13,674.00 |
|
Price Restoration Package |
* $14,479.99 |
* $17,999.99 (RT) |
|
IMA 61 is a great system for extreme cold temperatures. It has a recirculation system that will give you about 17 degrees additional increase in temperature rise compared to non recirculation systems. Also the power needed is 110vac, the IMA 111 & 185 require 220vac. The ductability is 75 which makes it great for those jobs that require more hose. It has a external fuel tank (Approximately 50 Gallons) that will give you a much longer run time without the need to refuel. This is a great system. |
|
What Comes with the IMA 111 (RT)Restoration Package |
|
|
Restoration Package IMA 111 with Tiger Loop and Fan Only DRI HEAT Part Number DHIMA111RT (370,000 Btu) |
|
|
Quantity |
Description |
|
1 |
IMA 111 (370,000 Btu) with Recirculation Connection |
|
1 |
8 Chimney Cap |
|
3 |
20 x 25 Black Flex Hose (High Heat) |
|
1 |
High Limit Digital Thermostat with 50 Cord |
|
1 |
Thermostat Plug |
|
1 |
Fuel Tank plus 10 Foot Quick Connect Fuel Line |
|
1 |
Little Giant Pull Cart |
|
1 |
Operations Manual |
|
Price for DHIMA111RT |
* $13,954.99 (RT) |
|
What Comes with the IMA 185 (RT)Restoration Package |
|
|
Restoration Package IMA 185 with Tiger Loop and Fan Only DRI HEAT Part Number DHIMA185RT (700,000 Btu) |
|
|
Quantity |
Description |
|
1 |
IMA 185 (700,000 Btu) with Recirculation Connection |
|
1 |
8 Chimney Cap |
|
4 |
24 x 25 Black Flex Hose (High Heat) |
|
1 |
High Limit Digital Thermostat with 100 Cord |
|
1 |
Thermostat Plug |
|
1 |
24 Outlet by 4 x 12 Distribution Head |
|
1 |
Fuel Tank plus 10 Foot Quick Connect Fuel Line |
|
1 |
Little Giant Pull Cart |
|
1 |
Operations Manual |
|
Price for DHIMA185RT |
* $17,999.99 (RT) |
|
|
Some Options We Can Suggest |
Price Each |
Total |
|
1 |
20 x 25 Black Flex Hose (High Heat) IMA 111 |
$421.00 |
$421.00 |
|
2 |
24 x 25 Black Flex Hose (High Heat) IMA 185 |
$621.00 |
$1,243.00 |
|
2 |
18 x 25 Mylar Ducting for Recirculation |
$41.89 |
$145.90 |
|
1 |
High Limit Digital Thermostat with 100 Cord |
$376.00 |
$376.00 |
|
1 |
20 Outlet by 2 x 15 Distribution Head IMA 111 |
$254.00 |
$254.00 |
|
1 |
20 Outlet by 4 x 12 Distribution Head IMA 111 |
$254.00 |
$254.00 |
|
1 |
24 Outlet by 2 x 18 Distribution Head IMA 185 |
$558.00 |
$558.00 |
|
1 |
24 Inlet by 4 x 12 Outlet Distribution Head IMA 185 |
$420.00 |
$420.00 |
|
4 |
12 Dia x 25 Mylar Ducting for when using the 4 x 12 Distribution Head |
$41.89 |
$167.56 |
|
2 |
18 Dia x 25 Mylar Ducting for when using the 2 x 18 Distribution Head |
$72.95 |
$145.90 |
|
|
Dimensions in Inches |
Weight |
||||||||
|
Model |
A |
B |
C |
D |
E |
F |
Shipping Length |
Shipping Depth |
Shipping Height |
lbs |
|
57 |
26 |
39 |
78 |
28 |
50 |
81 |
29 |
56 |
485 |
|
|
IMA 111 |
- |
27 |
39 |
87 |
31 |
53 |
96 |
41 |
67 |
726 |
|
IMA 185 |
- |
32 |
46 |
106 |
36 |
60 |
122 |
41 |
67 |
944 |
|
With the IMA 185 you will get the job done fast. It generates 700,000 BTUs of heat without adding any moisture or fumes to your drying environment. It has a recirculation system that will give you about 17 degrees additional increase in temperature rise compared to non recalculating systems. The IMA 185 puts out the same BTUs (7000,000) and CFM (6,500) as the IMAC 20000, but is much more portable. The IMA 185 can dry almost anything you throw at it. The IMA 185 is designed for larger jobs. |
|
|
Recirculcationset IMA .easy connect) |
|
What Comes with the IMA 111 (RTU)Ultimate Restoration Package |
|
|
Ultimate Restoration Package IMA 111 (RTU) with Tiger Loop and Fan Only DRI HEAT Part Number DHIMA111RTU (370,000 Btu) |
|
|
Quantity |
Description |
|
1 |
IMA 111 (370,000 Btu) with Recirculation Connection |
|
1 |
8 Chimney Cap |
|
4 |
20 x 25 Black Flex Hose (High Heat) |
|
1 |
High Limit Digital Thermostat with 150 Cord |
|
1 |
Thermostat Plug |
|
1 |
20 Outlet by 4 x 12 Distribution Head |
|
4 |
16 Dia x 25 Mylar Ducting for Recirculation Connection |
|
8 |
12 Dia x 25 Mylar Ducting for when using the 4 x 12 Distribution Head |
|
1 |
Fuel Tank plus 10 Foot Quick Connect Fuel Line |
|
1 |
Little Giant Pull Cart |
|
1 |
Recirculation Cap |
|
1 |
Operations Manual |
|
Price for DHIMA111RTU |
* $15,454.99 |
|
Narrated Step By Step Examples of How the Eliminator/ELE 6400 |
|||
|
|
|||
|
|
|
* $11,275.00 |
|
* $13,954.99 (RT) |
|
|
ITA 45 |
IMA 61 |
Tes Base Unit |
Tes 250,000 Btu |
||
|
Capacity (Gross) |
170,000 Btu/hr |
264,000 Btu/hr |
247,000 Btu/hr |
408,000 Btu/hr |
200,000 Btu |
250,000 Btu |
|
Efficiency Rating |
91-92% |
91-92% |
91-92% |
88% |
Not Disclosed |
Not Disclosed |
|
Output |
1,850 CFM |
2,800 CFM |
3,500 CFM |
5,330 CFM |
Air Movers Required at Heat Exchangers (TEX) |
Air Movers Required at Heat Exchangers (TEX) |
|
Fuel Consumption |
1.2 gal/hr |
1.85 gal/hr |
1.5 gal/hr |
2.83 gal/hr |
Not Disclosed (40Gal Typical Usage) |
Not Disclosed (40Gal Typical Usage) |
|
Included With Purchase Price |
ITA 45 Drying Packages Includes 154,000 Btu Heater, Y Connector, 25 High Heat Hose, Digital Thermostat, Exhaust Pipe & Cap and Operations Manual.
|
ITA 75 Drying Packages Includes 240,000 Btu Heater, Y Connector, 25 High Heat Hose, Digital Thermostat, Exhaust Pipe & Cap and Operations Manual.
|
IMA 61 Drying Packages Includes 225,00 Btu Heater, Tiger Loop & Fan Only, Y Connector, 50 High Heat Hose, Digital Thermostat, Exhaust Pipe & Cap, Fuel Tank and Operations Manual. |
IMA 111 Drying Packages Include 370,000 Btu Heater, Tiger Loop & Fan Only, Y Connector, 75 High Heat Hose, Digital Thermostat, Exhaust Pipe & Cap, Fuel Tank, Little Giant Pull Cart and Operations Manual.
|
Package Includes; 200,000 Btu Base unit with handle, 400 5/8 (equal red and blue) 200 Ύ (equal red and blue), tee assemblies, QD Wraps, 4 TEX units |
Package Includes: 250,00 Btu Base unit with handle, 500 5/8 (equal red and blue) 200 Ύ (equal red and blue), tee assemblies, QD Wraps, 5 TEX units |
|
Price |
* $5,199.99 (R) |
* $5,999.99 (RF) with External Auxiliary Fuel Tank Connection |
$8,1999.99 (RT) with Standard Tiger Loop & Fan Only (Recirculation) |
)* $14,479.99 with Standard Tiger Loop & Fan Only (Recirculation) |
$20,898.00 |
$24,498.00 |