|
With the Energedry Eliminator you will get the job done fast. Drying with this system, dehumidification is not needed in most cases, but can be added in some drying situations for even faster drying.
It's a fact of drying that warmer air can hold more water vapor. At 70°F, air can hold twice the moisture of air at 50°F. This particular difference of twenty degrees means that you can evaporate twice the moisture from structural materials. Use the Energedry Eliminator to create "thirsty" air with greater moisture-carrying capacity. The Energedry Eliminator is the most powerful Industry specific electric heat drying system that is totally self-contained and thermostatically controlled. Custom ramp up power feature allows for less energy consumption without compromising performance. Dry walls, carpet, wood floors, cabinets, etc... with ease. |
|
Teal Standard Color Great Color for Service Master Custom Colors Available Minimums Due Apply with Special Orders |
|
Comparison of the Eliminator to e-Tes |
|
WTRHTAM> |
|
Energedry Eliminator Detail Pictures |
|
Blue Standard Color Custom Colors Available Minimums Due Apply with Special Orders |
|
FREE SHIPPING to the Lower 48 States |
|
Requires Microsoft IE 7 or Earlier, Microsoft IE 8 WILL NOT WORK |
|
By Energedry |
|
Circuit 1 is for the fan. Circuits 2, 3, 4 and 5 are plugged in as needed for more heat. In Most Cases Only Circuits 2 and 3 Circuits Are Needed. This Will Give You Approximately a 25 Degree Temperature Rise Per Heating Element Circuit Used. |
|
Stackable Design |
|
Restoration Packages |
|
Check Out Your Part of the Country for Approximate Energy Cost Click on Logo Below |
|
The ELE Just Got Better. Introducing the Energedry Eliminator Introductory Prices Starting at $1,999,00 Please mention this Special when Calling (Some restriction may apply) |
|
1-877-432-8601 |
|
The Energedry ELE 6400 Revolutionized the Restoration Industry Now the Energedry Eliminator Is the Next Generation Heater |
|
Energedry Eliminator Series- Thermal Evaporative Accelerator The Eliminator is NEC ® compliant using standard 15amp household breaker |
|
Picture Above Shows Modular Thermostat Plug. Notice How the Fan Cord is Wrapped. |
|
The Eliminator Has 5 Switches As Shown On Panel Picture Above |
|
Eliminator Has 5 Pugs. 4 Short Cords and 1 Long Cord |
|
One Eliminator with High Limit Digital Thermostat with 12’ Cord |
|
Eliminator |
|
One 25’ Section of Mylar Ducting |
|
Eliminator (R) |
|
One Eliminator with High Limit Digital Thermostat with 12’ Cord |
|
-601 |
|
1-877- |
|
The Eliminator (XL) is Now Available. Please Call for More Information |
|
The Eliminator (XL) is Now Available. The Price is $2,199.00 Please Call for More Information |
|
What Comes with the Eliminator (R) |
|
|
DRI HEAT Part Number DHIELI |
|
|
Quantity |
Description |
|
1 |
ELE Eliminator |
|
1 |
High Limit Digital Thermostat with 25’ Cord |
|
1 |
Thermostat Plug |
|
1 |
Operations Manual |
|
Price for DHELELI |
$1,999.99 |
|
|
Energedry Eliminator |
e-tes 240 |
e-tes 120 |
|
|
|
|
|
|
NEC ® Compliant |
Yes, 15 amp breaker |
Yes , 35amp breaker |
Yes, 20 or 25amp breaker |
|
Self-Contained fan |
Yes – Unit comes complete with built in fan or use regular airmover for hi cfm application |
No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra |
No – does not come with built in fan. Basically a heating element in a plastic box – you supply fan as extra |
|
Directed heat drying at materials with temperature control at materials |
Yes – You set the desired temperature in the tenting or containment for maximum control |
No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment |
No - Only a separate exhaust fan control to keep room from over heating– Cannot control temperature at wet surface or inside containment |
|
Stackable as used |
Yes |
No |
No |
|
Temperature difference of air entering unit versus air temp coming out of unit |
Up to 96F temperature rise |
Up to 32F rise |
Up to 21F rise |
|
Easy to dry wood floors, cabinets, etc… with containment |
Yes – Airflow is 325 cfm making it easy to contain & control heat within plastic tenting, etc… |
No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air. |
No – Fan approx. 600+ cfm makes it hard to contain air and too much airflow means reduced temperature of air. |
|
Fast heat up capability |
Yes – Full heat within seconds of turning on |
Slower heat up and far less temperature increase |
Slowest heat up and far less temperature increase |
|
System allows you to use only the power necessary instead of having to use full power all the time. |
Yes – Advantage is you have more electricity for other equipment & use less electricity |
No |
? |
|
Fast cool down capability |
Yes – Advanced filaments’ allow you to shut the system off at any time with complete safety |
No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual. |
No – You need to run the fan for up to 5 minutes to cool the heater after shutting off unit as per operation manual. |
|
Use with 120v and 240v current |
Yes |
No – 240 volt only |
Yes |
|
Can be used with normal airmover & industry attachments |
Yes |
Yes |
Yes |
|
Can hot moist air be vented while keeping building exterior security System on |
Yes – Because system has a control thermostat you can use VapairVent avoiding ducting out window & losing building security |
No |
No |
|
Retail Price Complete |
$1,999.99 Yes - Complete |
$2,395.00 Not complete system |
$2,195.00 Not complete system |
|
What Comes with the Eliminator (RM) |
|
|
DRI HEAT Part Number DHIELIR |
|
|
Quantity |
Description |
|
1 |
ELE Eliminator |
|
1 |
6” Dia x 25’ Mylar Ducting |
|
1 |
High Limit Digital Thermostat with 25’ Cord |
|
1 |
Thermostat Plug |
|
1 |
Operations Manual |
|
Price for DHELIR |
$2,029.99 |
Energedry EliminatorThermal Evaporative Accelerator |
|
☻Quick and Safe Heating of Your Restoration or Building Site. ☻ELE Eliminator Electric Heater has been used to Dry Wood Floors, Personal Property, Structures, Carpet and much more. ☻With the ELE Eliminator there is No need for external air movement, because this system has a self contained fan. ☻DRI HEAT has Added this Revolutionary Heater to an Already Sizeable Collection of Heaters. ☻Stackable with “Ramp Up” power feature ☻Another use that has been reported to us is, Heating Up Personal Property and then Deodorizing it. |
|
|
|
|
|
Specifications |
Eliminator (R) |
Eliminator (RM) |
|
NEC ® Compliant |
Yes (15amp Breaker) |
Yes (15amp Breaker) |
|
Amps |
11.67 |
11.67 |
|
Air volume |
325 CFM |
325 CFM |
|
Fan Speed |
1 Speed |
1 Speed |
|
Ductable |
Yes |
Yes |
|
Duct Diameter |
6" |
6" |
|
Weight |
35 lbs |
35 lbs |
|
Dimensions |
30.3" X 13.95" X 15.75" |
30.3" X 13.95" X 15.75" |
|
Fuel |
Electric |
Electric |
|
Color |
Standard Blue or Teal |
Standard Blue or Teal |
|
Stackable |
Yes |
Yes |
|
Thermostat |
Yes |
Yes |
|
Price |
List Price $2,099.00 Our Price $1,999,00 |
Our Price $2,129.00 Sale Price $2,029,00 |
|
FREE SHIPPING to the Lower 48 States |
||
|
|
||
|
|
||
|
Drying Only Materials (Focus Drying) Compared To Drying Whole Area |
||
|
Eliminator |
|
|
|||
|
|
|
Narrated Step By Step Examples of How the Eliminator/ELE 6400 |
|||
|
|
|||
|
|